ETP Platter

The ETP Platter was developed for those people who believe they require a less heavy platter, with less Bass accentuation and more mid range.

Platter Machining 630x280

Technical Description

ETP: (Engineering Thermo Plastic, of which there are many types including acrylics)

The ETP Platter is provided with a separate integrated centre boss/hub. This positively prevents the softer ETP material (which has a much higher co-efficient of expansion) from very slowly sliding down the bearing taper as room temperature continually changes, and eventually jamming onto the spindle taper. This can cause considerable effort and eventual damage to the platter when trying to remove it.

The Platter is provided with two (2) 8mm threaded holes for the easy installation and removal of the ETP Platter. These can be clearly seen in the image.

The Platter can be custom machined to customer specifications as follows:

  • Label recess if required
  • 5 Brass weights for appearances sake they also add about 750gms to the weight of the Platter
  • The Platter can be supplied in a range if thickesses to assist in VTA adjustment for those people who are using different Tone Arms

Compatibility

  • Technics SL-1200 Mk2
  • Technics SL-1200 M3D
  • Technics SL-1200 Mk5
  • Technics SL-1200 LTD
  • Technics SL-1200 GLD
  • Technics SL-1210 Mk2
  • Technics SL-1210 M3D
  • Technics SL-1210 Mk5
  • Technics SL-1210 M5G

Buy It Now

The package includes:

  • 1x Mike New ETP Platter
  • 3x screws to secure magnet assembly
  • 2x 8mm bolts for handling

$1150AUD

including worldwide shipping

Solution Graphics